Remote control with three buttons
The Valcor alarm systems use remote controls with 3 buttons. With these remote controls you can achieve a high functionality, pliability and simplicity at work. When the remote control is used there is a light indication. According to the kind of remote control the buttons are situated as follow:
Type 1 – from left to right: first; second; third button;
Type 2 – from up to down: first; second; third button;
Type 3 – from left to right: first; second; a little button; third button from below.

Standard random code
The alarm systems “CROTAL”, “VARAN” and “CERBER” use a standard random code to fulfill all conditions of Instruction ? 104. This means each time you use the remote control, it generates a different code. In this way the disarming of the alarm system by a remote control imitation is very hard.

New generation random code with high security
The random code which “Valcor” alarm systems use is vastly improved which means at each pressing of a remote control button, the code which is emitted is different. The number of the possible combinations is 18000000000000000000. The jumping of the code expresses in pseudo accidental succession of the codes. This jumping, at “Valcor” security systems, is moving in different unique algorithm for each remote control compound with six 64-bits matrixes combined with the help of a new aggregate of algorithms “Lesi 3” , which give exceptional safety and reliability. All of these measures and algorithms for compilation and change of the code which the alarm system uses, stultify the using of devices as code recorders, grabbers, scanners and PC`s from highest generation for the alarm's disarming.
A once used code can be repeated approximately after 20 years in case of average daily pressing at least 80 times!

Double random code
This function is designed for vastly increase the security level against disarming the alarm. In this way all theoretical chances for disarming the system by the remote control are reduced to minimum.
When the function is on, to disarm the system press Button 1 first (you will hear a short quite tone) after that within 5 seconds press Button 2. If the 5 seconds are overdue, the siren starts to hoot.

Dynamic algorithm for changing the code
Each time you use the remote control the algorithm for changing the code is different.

Back-up memory
If you disconnect the car's battery, the alarm will memorize its condition (for example if you disconnect the battery while the alarm is armed and the siren is on when you connect the battery again you will receive the same alarm's condition).
This doesn't permit to disarm the system by power supply – method often used with other alarm models (because of the lack of back-up memory if you disconnect the car's battery and reconnect it again the alarm will remain the disarmed condition).

100% defense against stun gun
The system has 100% defense against stun gun proven by many tests. This defense doesn't permit the alarm disarming by high voltage which is a mass wide-spread method.

Interlock the engine – immobilizer with built in relay
The sense of this function is to prevent engine start, during the alarm is armed and to prevent a car theft. The work principle of locking the engine fulfills the conditions of Instruction № 104.
The engine interlock of our alarm systems is made by a built in relay with normal opened contacts. This guarantees a high security, because if want to work the car the alarm system has to work correctly.
This stultifies the attempts to disarm the alarm or to burn it out as well as to cut the connection cables. The only exception is the model “CROTAL” which is with external relay.
Our alarm systems are extremely qualitative and we make repeated tests to prevent unpleasant incidents. A proof for high quality is the extremely long guarantee period.
Nevertheless it is desirable to know where and how the engine work is lock.

Interlock the engine by simulation of engine trouble
In this regime of interlock there is a simulation of engine trouble /the engine starts up and in 5 seconds extinguishes/. This trouble misleads the thieves that the car has technical problems.

Remote “Engine stop”
By using this function you can switch off your engine via remote control.

Intelligent hi-jack system actuated by a remote control or turning on ACC position
This function is used to prevent a hi-jack by intelligent way. If there is an attempt for theft it is recommended to leave the keys and remote control to the ravishers. After that you can activate the hi-jack system by hand using another remote control or to activate it automatically /if this function is permitted and the model supports it/. After the procedure is on the engine is not lock and the system works correctly for about 40 seconds. During this period the ravishers will take away from you and you will b in safe. After these 40 seconds the siren and blinkers will start which will warn the driver and the rest one about the car stopping. This action has a purpose to prevent a car accident if this happened at a crossroad or a potential dangerous place and if you armed this system involuntarily. In 10 seconds after the siren started the engine locks. The remote control which is at the ravishers doesn't work since the hi-jack system started. The car can be unlocked only by the remote control armed it or by placing in service mode.
This system allows you to protect yourself as well as the car.

Possibility for fast arming/disarming the hi-jack system
In the models “VALCOR VR 72, 74/ there is an opportunity to arm/disarm this function very easy and quick according to the situation.

Three security modes
The security system has three different security regimes and the alarm arms in one of them according to the surroundings loading.

Five security regimes
There are 5 different security regimes and the alarm system arm in one of them according to the surroundings loading. In regimes ? 3, 4 and 5 there is an opportunity to arm separately shock-sensor and volumetric sensor.

Protection at working engine
This function is used when you want to protect the car and lock the doors while the engine works /for example to support the temperature in the car/.
If some protected entry points is opened the alarm will turn off the engine work and the siren will start to hoot.

Function “Short cut”
This function lets you to program a button for quick arming in some regimes which had been armed by a combination of buttons before that.

Arming reminder
The aim of this function is to remind you if you have forgot to arm the alarm system.

Service mode armed by the ignition key and protected by a two-number code
The purpose of this function is to disarm the hi-jack system or to disarm the alarm system if you loose or damage your remote control.
You can disarm the system only by an ignition key and two-number code programmed by yourself.

“Valet” mode with remembering the remote control
This function is used when you have permitted many extras of the system and you do not want to explain them to people who have access to your car /friends, car-wash, service-station/ you can easy and fast arm the “Valet” mode. In this case the alarm doesn't lock the engine and doesn't protect the car; it is impossible to record remote controls and the LED indicator lights permanently in red.

Self diagnostic mode
At each arming the system checks all inputs and if there is a problem with some of them it informs you with a characteristic sound.

By-passing zones
Lets you to arm the system and protect the car even here is a permanent working or damaged input /for example opened door/. During the by-pass the system ignores these inputs till their recovery /closing the door/ after that the system takes them under control.

Dual-zone piezo /built in/ and magnetic /external/ shock-sensor
This sensor reacts to vibrations or harsh hit over the car. It has two adjustable levels of work.
The fist one – warning – reacts to light hits and vibrations. The purpose is to warn the eventual violators for the alarm system;
The second one – alarm – reacts to harder hits or vibrations premise breaking of window glass or other intervention which has to be signaled.
The advantage of the shock sensor is that it reacts when there are violations of the car as well as its periphery.

Full shock programming through the remote control
It lets you to program the shock sensor sensibility from distance.

Possibility for silent adjustment of shock sensor
By this function you can adjust and test the sensor without a sound.

Doors and hoods security
The system reacts if protected entry points /doors and hoods/ are opened by buttons regulating the interior light or additional installed.

Intelligent searching for open door during protection
Each time you arm the alarm system it chirps strongly several times if finds open door or hood.

Possibility to disarm “Test for open door”
The sense of this function is because of the characteristics of some cars after the door is closed the interior light sensor is active still several seconds /”Dome light” function/. Because this if the function is on each time you arm the alarm system immediately after door close it will indicate an open door although there is no. If this function is turned on test for open door doesn't pass.

“Schmidt's trigger” for door entry
In this case all protected entry points are taken under protection /the system is fully armed/ in 2 seconds after the last door close or after the sensor for interior light turns off. This function eliminates the Dome light function in some cars.

“Ignition” sensor
The system reacts each time you switch on the ignition.

Intelligent current sensor
This sensor reacts at each change of electric consumption in the car /for example turning on an audio system; interior light indicator and so on/. This is very useful sensor but it can cause false alarms if the car has modules consummating current after the ignition is turned off /such modules are the cooling fan or GSM charger/
The current sensor in our alarm systems is intelligent and in many cases analyses the concrete situation and reduce the false alarms to minimum but in spite of this it is recommended to turn it off if you have such false alarms.
The current sensor can be used like sensor for open doors and hoods which turns the light on when they are open. This is suitable because it is no need to dismantle the car and draw out cables t reach the door key. A disadvantage is that if a bulb of interior light indicator burns out the sensor will not understand and detect an open door which you have to look out.

Indication for damaged sensor
Each time the system arms it chirps several times if detect damage sensor at doors and hoods.

Number of sounds at alarm event from high priority
The siren has different number of programmable sounds at arming by a door, hood or turning on the ignition which gives you an opportunity to personalize the sound of your alarm system and to can recognize it easier. At the models “CROTAL”, “VARAN” and “CERBER” they are 4, and at “VALCOR” they are 16.

Different sound combinations at alarm event from high priority
According to the number of programmable sounds which your alarm system has you have opportunity for different number of combinations from them. At the models “CROTAL”, “VARAN” and “CERBER” their number is 12 and at “VALCOR” – 256.

Different kind of sound from each alarm zone
- Warning sound – typical short strong sound which has to warn about the security system;
- Quiet sound – tuneful quiet tone indicates some event or action;
- Alarm sound from sensor – typical interrupted sound with a contract duration /about 20 seconds/. The tone is interrupted to can be distinguished from other sensors sound. The duration is contract because these sensors can be false armed and has not to disturb those around;
- Alarm sound from doors, hoods, ignition – programmable tone typical for your car. In this way you can recognize your car if there is a serious attack against your car and to take immediate action.

8 kinds of sound from the alarm zone of the shock or volumetric sensor
The siren has 8 kinds of sound arming from the shock or volumetric sensor.

8 kinds of sound from the warning zone of the shock or volumetric sensor
The siren has 8 kinds of sound arming from the warning zone of the shock or volumetric sensor.

Personal melody
This function allows the alarm system to hoot with your favorite melody programmed after an individual order.

Compulsion stopping of the siren without disarming the security system
This function is very useful because regardless of the reasons caused the siren sound you can easy stop the sound /by pressing some button/ without disarming the alarm system /the siren stops to hoot but the alarm is armed and the doors are locked/.

Inlet for dual-zone volumetric sensor
“VARAN”, “CERBER” and “VALCOR” have an inlet for dual-zone volumetric sensor. At “VARAN” and “CERBER” the security modes of the volumetric sensor follow these of the shock sensor and at the “VARAN” there is a possibility to program the volumetric sensor work in the different security modes.

Programmable security modes
Let you to program the volumetric sensor work in different security modes.

Three kinds of passively arming
The system can be armed in three ways without using a remote control.

Programmable locking at passively arming
If this function is on and the passively arming is in use each time the alarm is armed the doors will be automatic locked /if your car has a central door lock/.

Arming reminder
The purpose of this function is when you have forgot to arm the system it reminds you to do that.

Delay arming
The sense of this function is, if you have to take a large baggage from your car and you will not have a possibility to arm the system and lock the car (because you haven't a free hand) you can make the system to do it for you.
This function gives you a possibility for once automatic arming the system in mode 1, after the last door is closed.

Protective rearming
The sense of this function is if you disarm the system involuntarily and unlock the doors /if there is a central door lock/ the system will automatically arms itself after 15 seconds if no entry points /doors and hoods/ are open during this time.

Disarming with sound report for alarm event
The system reports with typical tones for past events during the secured period.

Memory for alarm events
The system classifies the alarm events of high importance and has a memory for the high priority event.

Multifunctional LED indicator
Each time lights in different way according to the function which is on at the moment /Valet mode, alarm event report, built in immobilizer and so on/.

N-number programmable functions
The system has N-number programmable functions.

Programmable siren
This means that the alarm has a large range of signals and sounds of the siren and you can choose these one you like and to tune up the alarm to use them /for example if your car is at a big parking and there are many other cars with “Valcor” alarm system, your alarm will hoots differently/. In case there is an alarm event you can easy recognize that this is your car and to undertake the necessary measures.

Possibility for work with arbitrary siren
When this function is on and you have a siren which you like /prefer tone, volume, sound/ you can tune the alarm system to work with it.

Low tone at arming and disarming
You can choose different kinds of sound for arming and disarming which you like and the most of them are melodies. In this way your alarm will not arm with jarring chirps and standard tones and with melodies which are pleasant for hearing.

Regulate the low tone at arming and disarming
This function allows you to control the volume of tones at arming and disarming as well as the volume of official and command sounds as you like.

Programming of different tones of the low sound
You have a large selection of different tones and melodies at arming and disarming.

Programming the volume of the low tone
It allows you to control the volume of the low tone.

Possibility for silently arming and disarming
At your desire the system can be armed and disarmed without tones.

Possibility for temporarily silently arming and disarming
There is a possibility to arm and disarm the alarm without tones with buttons combinations.

Programmable constantly silently arming and disarming
This function is used when you want to have only light signals /without sound signals/ at arming/disarming. The official and command tones remain with sound for better landmark.

Function “Panic”
The “Valcor” alarm system increases the personal security of the user in case he is under attack near the car as it attracts ravishers' attention arming the siren and blinkers for 60 seconds.

Function “Searching at the parking”
If the car is at a big parking and it's hard to locate it you can find it by pressing the Button 3 and Button 2 after that. The blinkers light till pressing a button from the remote control or for 60 seconds.

Blinkers` control
The system controls the blinkers by a built in relay.

Blinkers at “open door” or “on ACC position”
This function means each time you open a door or hood while the engine works, the blinkers will automatically flash.
The blinkers will shine until you close the door (hood), but maximum 30 seconds.

Built in relays for central door lock control
The system has built in relays which use to control central door lock.

Control central door lock with “Double lock”
Some car models have a “Double lock” function. When you activate this function and lock the doors it's almost impossible to open them mechanical. This function gives you a high security because even the window glass is broken the door can not be unlocked. If this function is activated the alarm system can control and this extra. The alarm system emits two follower locking signals.

Function “Lock on ACC position”
Always when this function is on you drive your car with locked doors. This way you will prevent from robbery and eventual violation of you and other persons in the car when you are at a crossroad or traffic lights.
When this function is on in 5 seconds after you turn on ACC position the doors lock /if there is a central door lock/ and they will unlock when you turn off the ignition key.

Control the central door lock on ACC position
While the key is on ACC position and the immobilizer is turned off, pressing Button 1 on the remote control you can control the central door lock /if the car has/.

Roll up power windows control for cars with function “Comfort”
This function is used on cars with “Comfort function” for roll up power windows and hatches. When this function is “On”, the time for car's locking prolongs with 40 seconds.

Possibility for recording and deleting up to 6 remote controls
In case you buy a new remote control, lost or damaged your one, you can delete it from the alarm memory and in this way it is unusable for other people.

Indication at new programmed remote control
In “Valcor” alarm systems there is a built up mechanism for control of active remote controls. Each time when a new remote control has been recorded in the alarm memory, after you turn on the ignition key on ACC position and release the immobilizer, the LED indicator lights rapidly for 20 seconds and stops.

Check the number of recorded remote controls in the alarm memory
These “Valcor” models having Valet mode have opportunity to check the exact number of active remote controls at the moment and if the number is different from those which you know /for example you have leaved the car at unknown persons for more than 120 hours/ you can remove all remote controls from the memory and record only these which you want. This function in combination with the function “warning for new recorded remove control” gives you an extremely high security and impossibility some your “friends” to disarm the system and record their own remote controls.

Detached inlet for dual zone volumetric sensor
The system has a detached inlet for dual zone volumetric sensor.

Programming the external dual zone volumetric sensor work
You can program the external dual zone volumetric sensor work in the different security modes.

Turning off the power supply of the external dual zone volumetric sensor after releasing the built in immobilizer
After you turn off the immobilizer the power supply to the sensor will stop. It will protect you from irradiation.

Multifunctional outlets
These are outlets which can be programmed and do different functions according to your wishes. They can vastly increase the security level and to lead new extras in your car.

Radio-channels
They give you an opportunity to control different electric consumers by pressing a remote control button.

Radio-channels with alarm disarming
It gives you a possibility by pressing and holding the respective remote control's button, parallel with triggering the channel, to disarm the alarm system /for example to disarm the system and to open a electric powered hood/.

Opportunity for separate control of second siren
In this mode each start of the siren emits a signal to the pager for the time the siren hoots. This can be used as a second siren. In this mode the outlet ???????? each time and for the time the siren is in alarm cycle. This can be used for control of second autonomous siren too.

Outlet “Status”
In this mode there is ground on the outlet for the time the alarm is disarmed. It can be used for switching off electric consumers /for example audio systems, lights and other/ at undertake the car in security mode. It can be used and for control of exported interlock /relay/ - irregular realization and increased security level.

Possibility for turning off electric consumers in security mode
Use this function when you want the system turns off electric consumers when goes on in arm.

Possibility to use the horn as second siren
In this mode the outlet ???????? the horn /or another device/ only when the door or hoods are open. This is made with purpose maximum sound at opening the car. It arms only by doors, hoods and turning on the ignition because this is the most serious outrage against the car and the effect over the thief has to be maximum. In this mode the outlet ?? ???????? only at alarm event of open door or hood. It can be used as a horn control after setting an additional relay too.

6 ways to control a pager with zones identification
In this mode if you have a pager /you can buy it additionally/ you can receive a signal with different duration according to the armed zone. When the system arms from doors /hoods/ or ignition key the pager channel stays active till the alarm disarming. In this way if you are out of range in moment of serious violation when you come into range you will receive a signal immediately independently the siren has stopped already. If you have a pager you will receive a signal with different duration according to the armed zone. If the alarm arming is from inside zone of shock sensor or volumetric sensor the channel is active for 10 seconds.

The cannel controls a pager in Security Mode 4
In this mode it is possible if you have a pager and installed volumetric sensor to receive a signal from the indoor zone of this sensor without starting the siren. This way you can fix and catch the thief.

Opportunity for distance control of the boot by the radio channel
You can open the boot by this radio cannel /from distance/.

Control the electric window glasses by radio channel /function “Comfort”/
When you arm the alarm the system rises the window glasses too.

Function “Dome light”
Disarm the alarm system and the indoor light continue to light.

Control an external interlock
Allows to make an additional engine interlock.

Control an intelligent module for distance ignition
When this function is on you can control an intelligent module to switch on/off the engine.

Control intelligent GSM modules
You can control modules with digital coded signals.

Multifunctional LED indicator
Gives you information about what is the security mode, the type of alarm event recorded in the alarm memory and other official indications.

“Hi-jack” system with marking the remote control
Allows you to switch off the engine in need and the alarm remembers which is the remote control armed this system and you can disarm it only by this remote control.

Communication interface “Security Lesi Intelligent Module Protocol – SLIMP”
“Valcor” VR 74 and 76 have an output, which will allow you to control via one wire, external modules via special communication interface. For example remote engine blockers, GSM communicators and etc., which will increase your protection.

Control of external intelligent digital microprocessor interlock
This function will allow you to control via one wire, external engine immobilizer by using special digital communication interface. Because every single security system has its own unique digital security code, it is not possible for the thieves even they connect their own such a security system on your wires to control your external immobilizer.

Built in GSM module
“Valcor” VR 76 has a built in module for informing and control by GSM. With its help you will be informed in real time about the alarm arming. You can control the alarm system from distance by given in advance command SMS (for example arming, disarming, distance ignition and many other).
This module is compatible with the following mobile telephones:
Ericsson: A26, A28, T28, T29, T39, R310, R320, T100, T105, T110, T200, T205, T210, T300, T310, T320, T600, T610 and so on,
Siemens*: C35, S35, M35, C45, S45, M45, C55, S55, M55 and so on.
* There are some characteristics at the compatibility.

Built in module for distance ignition
“Valcor” VR 76 has a built in module for distance ignition, which gives you an opportunity to start the engine from distance and to keep the protection over the car.

Visual sensor
“Valcor” VR 76 has a visual sensor by which you can switch over the different security modes according to the day periods.

Head-lights control
“Valcor” VR 76 has a visual sensor for automated control of the head-lights according to the day periods.

Inlet for programming trough a PC
“Valcor” VR 76 has an inlet for programming trough a PC, which gives you a possibility for fully programming of all alarm functions, for programming of your own melodies for arming and disarming and alarm event.

Double code
With this function the security level is vastly increased, because if you want to disarm the system you have to emit two codes within 5 seconds. If you don't do that, the siren will start to hoot.

4 types of sound at alarm event
The alarm system has an opportunity to program different combinations of sound at alarm event /open door, hoods, switch on ACC position/ on basis of 4 different programmed melodies.

Blinkers control /by an additional external relay/
The outlet for blinkers control is an opened collector and because of that it is necessity to use an external relay to control the blinkers.

Control all kinds of central door locking /by additional external relays/
The outlets for central door locking control are opened collectors and because of that it is necessity to use an external relays.

Modulated siren
The sirens are two types: First – with built in generator and Second – without electronics. They can be controlled by two different signals – modulated and non-modulated. The modulated signals are used when we want to have and use the melody sounds and programmable sounds of the VALCOR`s siren. By non-modulated signals you can control only sirens with built in generator independently they are with own emergency supply /autonomous/ or usual sirens. In this case when the alarm is armed it emits a constant signal and the siren starts to play with signal generated by its electronics. The sirens worked with modulated signals are sirens without electronics /only emitter or the so-called “spool”/ or specialized autonomous sirens.
The VALCOR alarms can work with all kinds of sirens, but they work especially with modulated sirens and autonomous sirens controlled by modulated signals to can reach a high variety of sounds and bigger functional and security opportunities. Pay attention- if you control a spool with non-modulated signal, it will burn out.