BulKey BKS210 is electromechanical lock with protections but without built-in management. BulKey BKS210 locks the door by 3 steel tenons with F12 mm and penetration to 20 mm. Movement of rough in locked or unlocked position is performed by servo-motor which is managed by the filing of a voltage electrical pulse 12V. The direction of movement of rough is determined by polarity of the passed tension. The lock has a built-in sensor, tracking the position of the doors - open / closed, which consists of 2 parts - active contacts located inside the lock and passive part, to be assembled cross strap. Lock BKS 210 has built-in protections, through which, in reaching the final status removed or harvested rough situation, they exclude engine and protect it from overloading. Thus there is no limit on the length of lodging management pressure to lock. This lock can be installed independently and without control center. If you want one system to manage more than one lock, then it is necessary to fit BKS210.
BKS210 lock can be installed on any type doors - wood, metal, armored.
BKS210 lock can be installed on any place and position. It is desirable if possible to fit a door frame to avoid additional elements to carry electrical signals through the moving parts of the door. The most effective place for installation of lock is on average a door near the mechanical lock.
The electromechanical lock BKS210 serves only for locking. Mechanical lock is used as a fixing element (using only the handle and language to it). She holds the door in the closed position so that when the points of electromechanical lock move, do not have any effort on their side.
The electromechanical lock BKS210 is not visible from the outside, so not sure about its existence or exact location, which in any attack will save the facility. A mechanical lock deviate efforts to alternative methods to dismantle, as a decoy for any thieves who will be running to attack her directly.
Price: 228 lv.
DESIGN OF THE ELECTROMECHANICAL LOCK BULKEY BKS 210
INTERNAL POWER SCHEME OF CONNECTING
DRAWING OF THE CROSS PLATE
TECHNICAL PARAMETERS OF BKS210
Type of the lock: Powered electromechanical lock
Operating voltage: 12V
Maximum power consumed: 3 (during movement)
Electricity consumed in the unlocked position: No /max 80mA if the protections are on/
Electricity consumed in the locked position: No /max 80mA if the protections are on/
Protection in reaching final status: Yes
Built-in sensor for a door: Yes
Sensors in the end positions rough: Yes
